Bluetooth Access Point

Ethernet - Bluetooth Dual-mode Access Point

The VirtualSCADA® Anybus Wireless Bluetooth - Bluetooth Access Point is a rugged dual-mode Bluetooth (Bluetooth Smart Ready) access point with Bluetooth low energy gateway functionality. The Wireless Bridge access point allows up to seven Bluetooth devices to connect to the 10/100 Base-T Ethernet network. With its IP65-classed housing, it is suitable for tough applications where you need a robust and maintenance-free Bluetooth connection at a range of up to 1,000 ft (300 meters) and at an aggregated throughput of 1 Mbps. The Wireless Bridge is equipped with an external antenna with RPSMA connector. There is a wide selection of certified external antennas to choose from. Configuration is made easy via the SMART push-button system, SNMP or AT commands via TCP/IP or a tailored web interface. The Wireless Bridge features connectBlue Low Emission Mode® which solves any potential interference between Classic Bluetooth and Wi-Fi that is not handled by Adaptive Frequency Hopping (AFH). Additionally, the Wireless Bridge features DHCP server / client and is configurable to optimize for Profinet. The access point is fully Bluetooth qualified and provides radio type approvals for the US, Europe, Japan and Canada (FCC, R&TTE, MIC, IC). The Wireless Bridge is also compliant with EMC, Safety and Medical standards as well as UL/cUL Class 1 Div 2 Hazardous location certified.

User Manual (PDF 1.38 MB)

Installation Guide (PDF 690 KB)

AT Command Guide (PDF 615 KB)

Call us for pricing and delivery

Bluetooth v4.0 (Bluetooth low energy and Classic Bluetooth)
User management and access control
PROFINET optimizations
Low Emission Mode®: Prevent disrupting other 2.4GHz radios
Quality of Service (QoS): Ethernet packet prioritization
Up to 1000 ft (300m) range
Security: Simple Pairing
Bluetooth Qualification: v4.0
Wireless Access Point (NAP, up to seven devices)
Wireless Ethernet Bridge
Personal Area Network User (PANU)

Power Supply

9-30 VDC

Operating Temperature

-40°F to + 149°F (-40 to + 65°C)


RH 5-90% non-condensing


3.59" x 2.60" x 1.43" HxWxD (91 mm x 66 mm x 36.2 mm)



Ethernet interface

10/100BASE-T with automatic MDI/MDIX cross-over

Ethernet Connector


Power Connector

M12 connector for power supply and external trigger



Max. number of devices: 

7 (Bluetooth Classic), 3 (combination of Low energy and Classic)

Configuration Method

SMART push-button system, Webinterface (with AT commands), SNMP

UL Certification

Hazardous location UL/cUL Class 1 Div 2



Part Number


Accessory Part Number

VS023040 (cable kit, M12 - RJ45 Ethernet cable, 1.8m and M12 power supply

Accessory Part Number

VS024700 (IP67 M12 connector kit for power and Ethernet, with screw terminals)

Accessory Part Number

VS1.04.0085.00000 (Magnetic antenna foot with 1,5 m cable and RP-SMA connectors, excl. antenna)

Accessory Part Number

VS1.04.0085.00002 (Screwable antenna foot with 1,5 m cable and RP-SMA connectors, excl. antenna)