Bluetooth Wireless Serial Bridge

Bluetooth Serial

The VirtualSCADA® Anybus Wireless Bridge Serial - Bluetooth is a rugged dual-mode Bluetooth (Bluetooth Smart Ready) serial port adapter. The serial port adapter has embedded Classic Bluetooth stack (SPP, DUN and PAN profiles), Bluetooth low energy stack with u-blox Low Energy Serial Port Service, serial RS232/422/485 interface, and support for seven connected devices simultanously. With its NEMA 4X/IP65-classed eclosure, it is built for tough and demanding environments, indoor or outdoor. The wireless Bridge has implemented the connectBlue Low Emission Mode® feature to make sure that Classic Bluetooth operates smoothly in parallel with other wireless technologies. Further features implemented include Wireless Multidrop™ with simultaneous connections to both Bluetooth low energy and Classic Bluetooth devices and Extended Data Mode™ for separated multipoint data channels so that different data can be sent to or received from each connected device. The Wireless Bridge dual-mode Bluetooth serial port adapter is easily configured via AT commands and comes with an external antenna. The high receiver sensitivity and output power enables a range of up to 1,000 ft (300 meters) whereby the robust Wireless Bridge provides a plug-and-play solution to replace conventional serial cables. The adapter is fully Bluetooth qualified and provides radio type approvals for the US, Europe, Japan and Canada (FCC, R&TTE, MIC, IC). The Wireless Bridge is also compliant with EMC, Safety and Medical standards. 

User Manual (PDF 366 KB)

Startup Guide (PDF 294 KB)

Getting Started Guide (PDF 410 KB)

AT Command Guide (PDF 308 KB)

Toolbox for Serial - Bluetooth (ZIP 810 KB)

Wireless Bridge Video (ZIP 16 MB)

Call us for pricing and delivery

Bluetooth v4.0 with Bluetooth low energy and Classic Bluetooth (Bluetooth Smart Ready)
Embedded dual-mode Bluetooth stack (SPP, DUN, PAN, GATT)
u-blox Low Energy Serial Port Service
GATT support for Bluetooth Smart
Wireless Multidrop™ with up to 7 devices
Up to 1000 ft (300m) range
Works well with standard Modbus-RTU

Power Supply

9-30 VDC , 9mA @30V (min.)

Operating Temperature

-22°F to + 185°F (-30 to + 85°C)


RH 5-90% non-condensing


3.00" x3.35" x 1.38" HxWxD (76 mm x 85 mm x 35 mm)

Baud Rate

1.2 - 460.8 kbit/s

Config Method:

AT commands via Bluetooth or serial port

Medical Electric Eq :

IEC 60601-1-2


External 2,4 GHz

Antenna connector

RPSMA (female)

Max. number of devices: 


Data bits


Stop bits



None, Even, Odd

UL Certification

Hazardous location UL/cUL Class 1 Div 2



Part Number

VS024140-B, Note does not include power connector (BINDER SERIES 712: PN:99 0402 00 02) and serial cable

Cable Kit Part Number

VS025240-B , Includes power connector and serial cable, (power adapter not included).